Accessories; Principle Of Operation; Mounting And Installation Of The Container - hajdu Z100ErP Installation And Owner's Manual

Z30ErP • Z50ErP • Z80ErP • Z120ErP • Z150ErP • Z200ErP
When receiving the product, please, check the packaging for the following acces-
sories (1 pc of each one, Figure 1):
• Installation and usage instructions
• Guarantee document
• List of Service Stations
• Energy Label
• Product information sheet
• Safety valve (parameters: PN10, 0.65±0.05MPa opening pressure, operational up
to 100°C, equipped with drinking water compliant, manually operated blow-off
device, valve with Rp1/2 connection on the outlet side.)

3. PRINCIPLE OF OPERATION

This closed system electrically heated hot water container can supply hot water to
one or more water withdrawing locations within households or institutions .
The hot water obtained is suitable for sanitary and consumption purposes, if it is
connected to a drinking water network complying with the limit values laid down
in Government Decree No. 201/2001 (X.25.).
After reaching the preset temperature, the heating is automatically turned off by
the temperature regulator. The polyurethane heat insulation surrounding the in-
ner tank prevents the fast cooling of the water, thus ensuring the availability of
hot water from the container over a long time. Due to the design of the container,
hot water is discharged unmixed. The corrosion protection of the inner tank is en-
sured by a special enamelling and active anodes. The enamelled design ensures
long service life, even in the case of aggressive (soft) water.
4. MOUNTING AND INSTALLATION OF THE
The mounting of the hot water container, as well as its connection to the
water and electrical network and commissioning must be performed by
a qualified professional according to our instructions and observing the
In case of improper connection and installation,
you will lose all your guarantee and warranty
20 2

2. ACCESSORIES

CONTAINER
standards IEC 60364 / MSZ HD 60364.
rights!