Vibration / Melody Mode; Enable / Disable Bi Sound While Pressing Button; Low Battery Indication; Set Up Fixed Count Down Timer - Autopage RS-727LCD Operation Manual

6. Vibration / Melody Mode:

This is useful when you are in a noisy place and it is difficult to
hear the beep sound from the remote control. In this mode,
the remote control vibrates itself if your security system is
triggered.
Press the button first, within 3 seconds press and hold
( )
button for 2 seconds to select the mode of vibration or
melody, the icon will displayed on the LCD screen to show
the LCD remote transmitter is on vibration mode.

7. Enable / Disable Bi Sound While Pressing Button:

It has a short "bi" sound while pressing the button of the LCD screen transmitter
If you want mute the "bi" sound mute always while press button. Press the
button first, within 3 seconds press and hold the
disable the "bi" sound.

8. Low Battery Indication:

When the power of the battery weakens, it has two short "bi" sound and flash
icon while pressing the button of the LCD screen transmitter.

9. Set Up Fixed Count Down Timer:

1. Press the button first, within 3 seconds press and hold the
for 2 seconds, the LCD screen will show the
( )
2. Press the button again showing next order time on the screen
20), press them again (ie.0: 30)...and so on.
3. After the timer is set the count down begins when the
Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1
hour, 1.5 hours and 2 hours maximum.
a. When the count down timer shows 0:00 it means to turn off the timer.
b. Press button for real time indication when the timer is counting down.
10. Out Of Range Indication:
The system will automatically check the range every 20 minutes after the unit is
armed.
1. If the user is within the range, the
2. If user is out of range, it has five short "bi" sounds and the
on the LCD screen.
(Bi) button for 2 seconds to
( )
icon and timer (i.e. 0:10),
icon flashes
icon will display on the LCD screen.
icon will disappear
8
button
(ie.0: