Table of Contents
Advertisement
-
(2-second)
1. Screen Lamp ON:
Press and hold the
melody sound and the LCD
screen lamp will turns on for 5 seconds
2. Power Save Mode:
transmitter uses "0" current to save the battery power.
Entry: 1. Press & hold the
melody sound and
entry the "power save mode".
2. Under the "Active Arming Mode" and Disarm mode. Turn the
ignition switch to on, the LCD remote transmitter will automatically
entry the "Power Save Mode"
Exit: Press any button of the LCD remote transmitter to exit the
"Power Save Mode".
3. Clear the Flash Icon and Melody Sound:
within 3 seconds will clear the
flash icon and melody sound on the LCD screen transmitter
4. Stop The Trigger Melody Sound:
screen will alert user through melody sound and flashing trigger icon, press any
button on the LCD remote transmitter to stop melody sound only.
5. Button Lock:
It is useful if you want to disable the
transmission function of the remote control temporarily to
prevent from any inadvertent pressing of buttons by others.
Press the
button first, within 3 seconds press and hold
the
( ) button for 2 seconds to activate or cancel the
button lock function, the
screen to show the LCD remote transmitter is on "Button Lock".
6. Vibration / Melody Mode:
It is useful when you are in a noisy place and difficult to hear
beep sound from the remote control. The remote control in
this mode will vibrate when your security system is triggered.
Press the
button first, within 3 seconds press and hold
the
(
) button for 2 seconds to select the mode of
vibration or melody, the
on the LCD screen to show the LCD remote transmitter is on
vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
It has a short "bi" sound while pressing the button of the LCD screen
Enable / Disable Bi Sound
(Bi) While Pressing Button
button one second, with one
While the power save mode, the LCD remote
button for 5 seconds, with one
icon on the LCD screen to indicate
While triggering the alarm the LCD
icon will displayed on the LCD
icon will displayed
8
Press the
button 3 times
Advertisement
Table of Contents
