Accessories; Basic Operation - Panasonic Switch-M24eGi Installation Manual

1.3 Accessories

Please be sure to confirm the content.
Please contact our distributor if any of the contents are insufficient.
 Installation Guide (this document)
 CD-ROM (PDF version of Operating Instructions, ZEQUO assist Plus)
 Rubber foot
 Wall mount bracket
 Screw (for fixing the wall mount brackets to the Switching Hub)
 Power cord
* Just the PN28240i-TH has 1 Installation Guide in Thailand (a total of 2 guides).
[Power Cord]
The following power cords are supplied as per the intended nation of delivery.
Product Number
PN28240i-TH
PN28240i-MY
PN28240i-ID
PN28240i-SG
[Optional accessories]
PN54022-XX
PN54024-XX
The XXs are identical to the intended nation of delivery codes.

1.4 Basic operation

This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Switching Hub and connect the other end into an electric outlet.
This Switching Hub operates at AC 100 - 240 V (50/60 Hz).
When power is supplied, all the LEDs are turned ON.
Then, PWR LED (Power) lights in green, STATUS/ECO LED (Status/ECO mode) lights
in orange, and self-diagnosis of hardware is executed.
On completion of self-diagnosis, PWR LED (Power) and STATUS/ECO LED
(Status/ECO mode) light in green, and the Switching Hub starts operation as a
Switching Hub.
When this Switching Hub successfully communicates with a terminal connected to a
port, the Port LED lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, the Port LED does not light up.
When the Eco mode is set,Port LED lamps do not light up.
For configuration and management method, please see the PDF version
Operating Instructions in CD-ROM.
Locale Power Cord Rating
Thailand 250 VAC 6 A
Malaysia 250 VAC 10 A
Indonesia 250 VAC 10 A
Singapore 250 VAC 5 A
1000BASE-SX SFP Module (i)
1000BASE-LX SFP Module (i)
FUSE Rated Current
- TIS166-2549
13 A BS1363
- CEE7/7
5 A BS1363
Quantity
1
(*)
1
4
2
8
1
Plug Type
9