[Remote Wakeup]; [Auto Transfer] - Panasonic Lumix DC-G90 Operating Instructions Manual

9. Menu Guide
[Wi-Fi]
[Wi-Fi Function]
∫
[Wi-Fi Setup] (P298)
∫
[Bluetooth]
[Bluetooth] (P260)
∫

[Remote Wakeup]

∫
[Returning from Sleep Mode]
∫

[Auto Transfer]

(P271)
∫
[Location Logging]
∫
[Auto Clock Set]
∫
[Wi-Fi network settings]
∫
Registers the Wi-Fi access point.
Wireless access points used to connect the camera to Wi-Fi networks will be registered
automatically.
• Up to 17 wireless access points can be registered. If you try to register more than 17 access
points, the oldest registered access points will be deleted.
• Performing [Reset Network Settings] will delete registered wireless access points.
[Wireless Connection Lamp]
This enables/disables the WIRELESS connection lamp.
If you select [OFF], they will not light/flash.
[Beep]
This allows you to set the electronic sound and the electronic shutter sound.
Settings: [Beep Volume]/[E-Shutter Vol]/[E-Shutter Tone]
Not available in these cases:
• [Beep] is not available when [Silent Mode] is set to [ON].
(P256)
(P266)
(P269)
(P273)
(P274)
(P293)
230