Table of Contents
Advertisement
12. Others
TV, PC, Printer
No image on the TV.
The TV screen is blurry or not coloured.
• Confirm the connection with the TV.
• Set the TV input to HDMI input.
VIERA Link is not working.
• Check that the [VIERA Link] of the camera is set to [ON].
• Check the VIERA Link setting on the connected device.
• Turn off and on the camera.
Cannot communicate with the PC.
• Set the [USB Mode] of the camera to [PC(Storage)].
• Turn the camera off and on.
The card is not recognised by the PC.
(SDXC memory card is used.)
• Check if your PC supports SDXC memory cards.
• When connecting the camera to the PC, a message recommending that the card be formatted
may be displayed. Do not format the card.
• If the [Access] displayed on the monitor does not disappear, turn off the camera and disconnect
the USB connection cable, and then connect again.
Cannot print when the camera is connected to a printer.
• Pictures cannot be printed using a printer that does not support PictBridge.
• Set to [PictBridge(PTP)] in [USB Mode].
The ends of the images are cut at printing.
• If the printer has trimming or borderless printing functions, cancel these settings before printing.
(Refer to the operating instructions for your printer.)
• Depending on the photo studio, images recorded with their aspect ratio set to 16:9 can be
printed at sizes in 16:9 aspect ratio. Ask the photo studio in advance.
(P301)
(P233)
(P233)
335
(P234)
Advertisement
Table of Contents
