Adjusting The Flash Output; [Auto Exposure Comp.] - Panasonic Lumix DC-G90 Operating Instructions Manual

6. Stabiliser, Zoom and Flash

Adjusting the Flash Output

Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
Preparation: Set [Wireless] and [Firing Mode] in [Flash] to [OFF] and [TTL], respectively.
1
Select the menu.
>
MENU
2
Press 2/1 to set the flash output and then press [MENU/SET].
• You can adjust from [j3 EV] to [i3 EV] in steps of 1/3 EV.
• Select [n0] to return to the original flash output.
• [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
• The [Flash Adjust.] setting also applies to an external flash.

[Auto Exposure Comp.]

Applicable modes:
The flash output is automatically adjusted in accordance with the exposure compensation
value.
> [Rec] > [Flash] > [Auto Exposure Comp.]
MENU
Settings: [ON]/[OFF]
• For details on Exposure Compensation, refer to P111.
• The [Auto Exposure Comp.] settings also apply to an external flash.
[Rec] > [Flash] > [Flash Adjust.]
(P313)
165
(P313)