Table of Contents
Advertisement
9. Menu Guide
[Direct Focus Area]
This moves the AF area or MF Assist using the cursor button when recording.
• You can move the positions below with the cursor button.
– When [š]/[
]/[
– When [
] is selected: lock-on position
– When [
] is selected: enlarged area
• Use the Quick Menu
button, such as AF Mode selection.
• [Direct Focus Area] is fixed to [OFF] in the following case:
– [Glistening Water] (Scene Guide Mode)
– Creative Control Mode
– When [4K Live Cropping] is set
[Focus/Release Priority]
Set whether to give priority to focus or shutter release during AF.
• Different settings can be applied to different Focus Mode settings ([AFS/AFF], [AFC]).
[FOCUS]
Disables recording when focus is not achieved.
Performs recording while controlling the balance between focusing and
[BALANCE]
shutter release timing.
[RELEASE]
Enables recording even when focus is not achieved.
[Focus Switching for Vert / Hor]
Focus positions are stored separately for the camera's horizontal and vertical orientations.
Memorises separate positions for horizontal
and vertical orientations (two vertical
orientations, left and right, are available).
• The following last-specified positions will be
[ON]
memorised.
– The last AF area position (when [
– The last MF Assist display position
[OFF]
Sets the same setting for both horizontal and vertical orientations.
[Loop Movement Focus Frame]
When setting the AF area position or the MF Assist display position, you can now loop the
position from one edge to the other edge of the screen.
]/[Ø] is selected: AF area
(P58)
or Fn buttons
(P60)
to use the functions assigned to the cursor
], [Ø] or [
216
] is used)
Advertisement
Table of Contents
