Table of Contents
Advertisement
10. Using the Wi-Fi/Bluetooth function
Connecting to a Smartphone (Bluetooth Connection)
Follow a simple connection setup procedure (pairing) to connect to a smartphone that
supports Bluetooth Low Energy. When pairing is set up, the camera also automatically
connects to the smartphone via Wi-Fi.
• Supported smartphones
Android:
Android 5.0 or higher equipped with Bluetooth 4.0 or higher
(excluding those that do not support Bluetooth Low Energy)
iOS:
iOS 9.3 or higher (excluding the iPad 2)
First-time connection
∫
You need to set up pairing (connection) for the first time only.
When pairing is set up, a Wi-Fi connection is made automatically.
On the camera
>
[Setup] > [Bluetooth] > [Bluetooth] >
MENU
[SET] > [Pairing]
• The camera enters pairing standby mode and displays its device
name.
On your smartphone
1
Start "Image App".
• If a message is displayed indicating that the smartphone is searching for cameras, close
the message.
2
Select [Bluetooth].
3
Turn on the Bluetooth.
4
Select the device name displayed on the camera's screen from the [Camera
enable to be registered] list.
• Bluetooth connection between the camera and the smartphone will be made.
(For Android devices) A Wi-Fi connection will be made by selecting [Connection].
If you are using an Android device, follow the steps up to here to complete the setup.
Proceed to the steps below only if you are using an iOS device (iPhone/iPod touch/iPad).
• If [Wi-Fi Password]
of purchase, [Wi-Fi Password] is set to [OFF])
• If [Wi-Fi Password] is set to [ON] on the camera, you need to install the profile.
1 Install the profile.
• If a pass code is set on the smartphone, you need to enter it.
2 Press the home button to close the browser.
5
Turn on the Wi-Fi function in the setup menu.
6
On the Wi-Fi setting screen, select the SSID displayed on
the camera. (The device name selected in step
• If the SSID is not displayed, it may be displayed after the Wi-Fi
function is turned off and on.
• When you need to change the connected device, follow the
on-screen message to change the setting.
(P298)
is set to [OFF] on the camera, select [Wi-Fi Setup]. (At the time
260
4
)
Wi-Fi
0123456789ABC
Advertisement
Table of Contents
