Table of Contents
Advertisement
9. Menu Guide
[Metering Mode]
Applicable modes:
Type of optical measurement to measure brightness can be changed.
>
[Rec]/
MENU
[
]
(Multiple)
[
]
(Centre weighted)
[
]
(Spot)
• If you set the spot metering target on the edge of the screen, the metering may be affected by
the brightness around the location.
Not available in these cases:
• In the following case, [Metering Mode] does not work:
– When the Scene Guide Mode is set to anything other than [Panorama Shot]
[Highlight Shadow]
Applicable modes:
You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.
>
[Rec]/
MENU
1
Press 2/1 to select the type of Highlight Shadow.
(Standard)
(Raise the contrast)
(Lower the contrast)
(Brighten dark areas)
/
/
(Custom)
[Motion Picture] > [Metering Mode]
Brightness measurement
position
Whole screen
Centre and surrounding area
Centre of [i]
(spot metering target A)
[Motion Picture] > [Highlight Shadow]
A state with no adjustments is set.
Bright areas are brightened, and dark areas are darkened.
Bright areas are darkened, and dark areas are brightened.
Dark areas are brightened.
Registered custom settings can be applied.
Normal usage
(produces balanced pictures)
Subject in centre
Great difference between
brightness of subject and
background
(e.g. person in spotlight on stage,
backlighting)
201
Conditions
Advertisement
Table of Contents
