Remote Access - Panasonic PalmCam PV-DC2090 Operating Instructions Manual

Remote Access
This function enables you to operate the
camera from great distances with the use of
a modem,
• Remote recording from the PC.
• Downloading selected images to the PC.
LED
2
Lamp
3
Set POWER to MANUAL REC.
• The LED Lamp lights up.
Press MENU to dispray MANUAL REC
menu.
.MANL_,[. REC lrJ> /
CARD SLOT NO, 1
FLASH AUTO
SELFTIMER OFF
lRm
SI_L : .v SET : • •
Exrr : MENU
• When the recording mode is set to
ZOOM, [] (Motion Image Rec) or
Q_j(Burst Rec), the recording mode
will go to F (Fine) when connecting
the Modem Card.
Press • or • to select REMOTE
ACCESS and press I_.
loi EM°TEAccESs
PUSH MENUTOEX_
CARD1
Note :
Before operating Remote Access,
• Be sure to install PalmCam Camera
Driver (see pages 46, 52).
• Be sure to insert CF Card and Modem
Card into the card slot.
• Make all connection on page 58.
• The Camera must be turned on.
• For extended period of use, it is
recommended to use the AC Adaptor
(optional) for a power source.
61