Table of Contents
Advertisement
10. Using the Wi-Fi/Bluetooth function
Sending images in the camera to a web service with simple operations
∫
1
Display an image.
2
Press 4.
(When group pictures are selected, press 3, and select
[Upload(Wi-Fi)] or [Upload All(Wi-Fi)].)
• The same operation can be performed by touching [
(When group pictures are selected, select [Upload(Wi-Fi)]
or [Upload All(Wi-Fi)] after touch [
[
], and then touch [
• If a screen is displayed asking you to select the connection method:
• If a screen is displayed asking you to acquire a new login ID:
3
Select [Yes] on the confirmation screen.
4
Select a web service.
5
Check the send settings, and select [Set].
4
5
• Step
,
are not necessary when you continue to send another image.
• To change the send setting, press [DISP.].
• To terminate the connection, press [MENU/SET] or operate other controls to exit the
playback screen. You can also terminate the connection by pressing [Wi-Fi].
To change the settings for sending images or web service
Terminate the Wi-Fi connection, and follow step
• You can also change the send settings by pressing [Wi-Fi] while using a Wi-Fi connection.
(P258)
• When there are no available connections to wireless access points in History:
Select the connection method and connect the camera to a wireless access point.
• When you are not registered to the "LUMIX CLUB":
Acquire a login ID and set a password.
• When group pictures are displayed continuously, all pictures in the group will be sent. When
group pictures are displayed one by one, the currently displayed picture will be sent.
], [
SUB
].)
MENU
(P279)
1
(P289)
287
].
], [
], or
(P289)
and onwards again.
(P293)
(P258)
(P293)
Advertisement
Table of Contents
