Table of Contents
Advertisement
9. Menu Guide
[Reset Network Settings]
The following network settings are reset to the default:
– [Wi-Fi Setup] (Excluding [LUMIX CLUB])
– Registered device information in [Bluetooth] and values in [Wi-Fi network settings]
• When requesting a repair or transferring/disposing of the camera, refer to "About the personal
information" on P341.
[Pixel Refresh]
It will perform optimisation of imaging device and image processing.
• Imaging device and image processing is optimised when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to the front of the imaging
device is performed.
• The dust reduction function will operate automatically if you set the camera on/off switch to
[ON]. Use this function if the dust is particularly noticeable.
[Level Gauge Adjust.]
[Adjust.]
[Level Gauge
Value Reset]
[Demo Mode]
You can try Post Focus operations, such as focusing and Peaking, with the image picture.
Hold the camera in a horizontal position, and press [MENU/SET]. The
level gauge will be adjusted.
Restores the default level gauge setting.
237
Advertisement
Table of Contents
