Cleaning The Bean Container - Jura GIGA X3c Instructions For Use Manual

5 Maintenance
Cleaning the bean
container
42
T Press the Rotary Switch.
'Machine is being
tinued. Water flows straight into the drip tray and out of the
hot-water spout and dual spout repeatedly.
'Empty drip tray'
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The start screen is displayed.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
T Press the On/Off button Q to switch the GIGA off.
T Switch the machine off at the power switch.
T Open the service cover on the back of the machine by press-
ing above the JURA logo.
T Push the red sliding catch completely to the rear to close the
bean container.
T Turn the blue locking device outwards.
T Remove the bean container.
T Remove the aroma preservation cover.
T Empty the bean container.
T Clean the bean container with a soft, dry cloth.
T Fit the bean container.
T Turn the blue locking device inwards.
T Pull the red sliding catch completely forwards.
T Refit the service cover and fix it by pressing above the JURA
logo. It will click into place audibly.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
descaled', the descaling operation is con-