Language - Jura GIGA X3c Instructions For Use Manual

4 Permanent settings in programming mode

Language

32
U
'Rotary Selection': Product selector view with additional pro-
ducts can be started by turning the Rotary Switch.
U
'Alarm displays': The start screen displays messages such as
'Clean machine'
Example: Proceed as follows to prevent one-off settings being
made during preparation.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Switch off after'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Lock/enable'
T Touch
'One-off
'One-off settings'
T Now move your finger across the controller to close the lock
symbol.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Lock/enable'
T Touch 'Back' the number of times needed to display the start
screen again.
In this programme item you can set the language used by your
GIGA.
Example: Proceed as follows to change the language from
to 'Deutsch'.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
or 'Clean the milk system'.
'Machine settings'
'Lock/enable'
settings'.
'Machine settings'
is displayed.
is displayed.
'English'
is displayed.