Descaling The Machine - Jura GIGA X3c Instructions For Use Manual

5 Maintenance

Descaling the machine

J CAUTION
CAUTION
CAUTION
CAUTION
40
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
'Press the Rotary Switch'
T Press the Rotary Switch.
'Machine is being
repeatedly.
The operation stops automatically.
'Empty coffee grounds container'
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Cleaning is now complete. The start screen is displayed.
The GIGA builds up deposits of limescale over time and automati-
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
E If you use an external filter cartridge and this is activated, you
will not be prompted to descale.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 50 minutes.
E JURA descaling tablets are available from specialised dealers.
cleaned', water flows out of the dual spout