Cleaning The Milk System; Dismantling And Rinsing The Dual Spout - Jura GIGA X3c Instructions For Use Manual

5 Maintenance

Cleaning the milk system

CAUTION
Dismantling and rinsing
the dual spout
36
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.
Precondition: The start screen is displayed.
is displayed.
T Touch
'Clean the milk
T Touch 'Start'.
T Touch 'Start'
'Milk system cleaner'
T Remove the milk pipe from the milk container.
T Add 1 dosing unit of milk system cleaner to the rear part of
the container.
T Place the container under the dual spout and connect the
milk pipe with the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Touch 'Next'.
'Milk system is being
pipe are cleaned.
The operation stops automatically. Your GIGA is once more
ready for use.
The dual spout must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene.
system'.
again.
/ 'Connect the milk tube'
cleaned', the dual spout and the milk
'Clean the milk system'