Setting 1000Base-X For Sfp+ Port (Sgs-6340-16Xr, Sgs-6340-20S4C4X Only) - Planet SGS-6340-24T4S Quick Start Manual

8. Setting 1000BASE-X for SFP+ Port (SGS-6340-16XR,
SGS-6340-20S4C4X Only)
The Managed Switch supports both 1000BASE-X and 10GBASE-X SFP transceiver
by manual setting and the default SFP+ port speed is set to 10Gbps. For example,
to establish the fiber connection with 1000BASE-X SFP transceiver in the ethernet
1/0/1, the following command configuration is required:
SGS-6340-16XR#config
SGS-6340-16XR(config)#interface ethernet 1/0/1
SGS-6340-16XR(config-if-ethernet1/0/1)#speed-duplex force1g-full
10
Figure 8-1 Setting 1000BASE-FX Screen