Canon FAX L1000 Service Manual page 68

FAX-L1000 Chapter 2: Operating Instructions
c) Reports output automatically (Memory clear report)
When this fax is turned on and the memory clear report is automatically printed out, the
image data which appears on the report is the data which was deleted without being able to
be backed up. After the memory clear report is printed, the image data management
information is automatically deleted.
TX/RX NO
MODE
CONNECTION TEL/ID: Displays the number and each digit (24 digits) of onetouch
PGS.
SET TIME
ST TIME
SENDER NAME
12/31/1999 11:52 FAX 833 4423
*******************************
***
*******************************
TX/RX NO MODE CONNECTION TEL/ID
0011 TRANSMIT [*002]HUNT INVESTMENTS
5011 CONFID. RX
Figure 2-9 Memory Clear List
: Indicates four digits of the transaction number
: Displays the communication modes of TX, RX, polling TX,
timer TX, etc.
speed dial and coded speed dial.
: Number of pages are stored in memory
: Time when data is stored in memory (24-hour display)
: Displays a start time for delayed TX, etc. (24-hour display)
: Sender name appended to transmission (up to 24 characters)
Displays a 4-digit department code (only used when department
access code setup (DAC SETUP) is "ON" ).
WORLD ESTATE,INC.
MEMORY CLEAR REPORT
***
MEMORY FILES DELETED
PGS. SET TIME ST. TIME
2 12/31 13:00 23:30 R.LOUIS
1 12/31 14:46 -----
2-12
001
SENDER NAME