High Temperature Parts - Canon FAX L1000 Service Manual

1.2 High Temperature Parts

Precautions
To prevent burns while disassembling the fax, disconnect the power cord at
least 10 minutes before starting disassembly, to allow high temperature parts
to cool down.
How to treat burns
Heat of about 122°F (50°C) or more causes burns. Also, the longer the
contact, the more severe the burn.
When treating a burn, the first minute after receiving the burn is the most
important. Cool the burn immediately with cold running water. In the case of
a serious burn, seek medical attention immediately.
The temperatures of the parts shown below become more than 50°C during operation.
Be Careful not to burn yourself on any of these parts during servicing.
Fixing ass'y
ECNT board (heatsink)
FAX-L1000 Chapter 1: Safety and Precautions
Figure 1-2 High Temperature Parts
1-3
Read motor
Power supply unit (heatsink)
SCNT board (heatsink)
Main motor