Canon FAX L1000 Service Manual page 593

3.10.4 Maintenance and service
a) Test print
The following items can be printed by selecting and executing a TEST MENU:
•SHOW PAGE COUNT
Displays the total number of printed pages when used as a printer. The total page number is
only shown briefly on the display but does not print. The page count prints in the TEST
PRINT.
This counter displays the number of printed pages when used as a printer. When
checking the total number of printed pages for this unit, please check with the
service mode #7 PRINTER #3 PRINT COUNT.
•TEST PRINT
Make a Test Print. The Test Print lists the printing environment settings and also displays
the graphic and text printing capabilities.
•PRINT PS FONTS
Available only after the Translator Module A5 for FAX-L1000 PostScript Kit has been
installed. Prints the PS Font List.
•PRINT PCL FONTS
Prints the PCL Font List.
•PRINT PS DEMO
Available only after the Translator Module A5 for FAX-L1000 PostScript Kit has been
installed. Prints the PS demonstration page.
•PRINT PCL DEMO
Prints the PCL demonstration page.
•CONTINUOUS TEST
Make continuous Test Prints.
•CLEANING PAGE
See following page.
Follow these steps to make a Test Print:
(1) Press the Go button to set the printer off-line. The On line indicator should be OFF and
PAUSED appears in display.
(2) Press the Menu button until you see "TEST MENU" in the top line.
(3) Press the Item button until you see "TEST PRINT" in the bottom line.
(4) Press the Enter button to start printing a Test Print.
(5) After the pages are printed, press the Go button to put the printer on-line.
FAX-L1000 Chapter 5: Appendix
5-235