Canon FAX L1000 Service Manual page 574

FAX-L1000 Chapter 5: Appendix
b) Installation
Please refer to FAX-L1000 PostScript Kit step b-8) for the procedures up to opening the
side cover.
NOTE
NOTE
Open the tab on the right side of the memory slot by the moving it
b-1)
to the right.
b-2) Remove the RAM DIMM from its packaging and insert it into the
socket at the bottom of the memory slot board.
Make sure: the tab of the memory slot snaps close.
b-3)
Make sure the notch on the front edge of the RAM DIMM is to the left
when you insert the RAM DIMM into the socket.
Insert the other RAM DIMM into the second slot above the first DIMM
b-4)
following the procedure above.
There are 4MB, 8MB, and 16MB RAM DIMMs available.
Perform the Cold Reset. Please refer to 3.10.2 Service Operations: c)
b-5)
Cold Rest when performing the Cold Reset.
5-216
tab