Canon FAX L1000 Service Manual page 548

FAX-L1000 Chapter 5: Appendix
##1103 [TX/RX] Disconnection from network
Cause:
Solutions:
##1111 [TX/RX] Protocol error, unspecified
Cause:
Solutions:
##1112 [TX/RX] Release because of error in a local area
Cause:
Solutions:
Indicated above
(1) Re-check the phone number and try the call again.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in
#4C ISDN BASIC, [G4/G3 Fallback] and [Speech Fallback] .
(4) Take countermeasures as outlined in D-channel connection
error in this Chapter, 3.6.6 Maintenance and service, c)
Communication problems.
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in
#4C ISDN BASIC, [G4/G3 Fallback] and [Speech Fallback] .
(4) Take countermeasures as outlined in D-channel connection
error in this Chapter, 3.6.6 Maintenance and service, c)
Communication problems.
(5) Make an inquiry to the maker of the Switching equipment.
Indicated above
(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in
#4C ISDN BASIC, [G4/G3 Fallback] and [Speech Fallback] .
(4) Take countermeasures as outlined in D-channel connection
error in this Chapter, 3.6.6 Maintenance and service, c)
Communication problems.
(5) Make an inquiry to the maker of the Switching equipment.
5-190