Mercedes-Benz GLC Owner's Manual page 428

Clean the plastic lenses of the mirror turn
X
signals in the exterior mirror housing using
a wet sponge and mild cleaning agent, e.g.
Mercedes-Benz car shampoo or cleaning
cloths.
Cleaning the side running board
! Do not clean the aluminium inserts of the
side running board with alkaline or acidic
cleaners, such as wheel cleaner. Do not use
acidic wheel cleaners to remove brake
dust. The aluminium inserts could other-
wise be damaged.
Cleaning the sensors
! If you clean the sensors with a high-pres-
sure cleaner, make sure that you keep a
distance of at least 30 cm between the
vehicle and the high-pressure cleaner noz-
zle. Information about the correct distance
is available from the equipment manufac-
turer.
Clean sensors : of the driving systems
X
with water, car shampoo and a soft cloth.
Cleaning the reversing camera
! Do not clean the camera lens and the area
around the reversing camera with a high-
pressure cleaner.
Make sure that the vehicle is stationary and
X
that the key is in position 2 in the ignition
lock.
To open the cover of the reversing cam-
X
era: with COMAND Online or Audio 20 acti-
vated, call up the vehicle menu: press the
Ñ button.
To switch to the menu bar: slide 6 the
X
controller.
To select System System settings settings: turn and
X
press the controller.
To select Rear view camera Rear view
X
press the controller.
To select Open camera cover Open camera
X
press the controller.
The reversing camera cover opens.
To clean the reversing camera: use clean
X
water and a soft cloth to clean camera
lens :.
Cleaning the 360° camera
! Do not clean the camera lens and the area
around the 360° camera with a high-pres-
sure cleaner.360
Care
camera: turn and
cover: turn and
Z
425