Mercedes-Benz GLC Owner's Manual page 128

Adjusting the rear seat head restraint
height
If the head restraint is fully lowered, it is
X
necessary to press release catch :.
To raise: pull the head restraint up to the
X
desired height.
To lower: press release catch : and push
X
the head restraint down until it is in the
desired position.
Fitting and removing rear head
restraints
Release the rear seat backrest and fold it
X
slightly forwards (
Y
To remove: pull the head restraint up to
X
the stop.
Press release catch : and pull the head
X
restraint out of the guides.
To refit: insert the head restraint so that
X
the notches on the bar are on the left when
viewed in the direction of travel.
page 393).
Push the head restraint down until you hear
X
it engage in position.
Fold back the rear seat backrest until it
X
engages.
Adjusting the 4-way lumbar support
To raise the backrest contour
:
To soften the backrest contour
;
To lower the backrest contour
=
To harden the backrest contour
?
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
Switching the seat heating on/off
Switching on/off
G WARNING
If you repeatedly switch on seat heating, the
seat cushion and backrest padding may
become very hot. The health of vehicle occu-
pants with limited temperature sensitivity or a
limited ability to react to excessively high
temperatures may be affected or they may
even suffer burn-like injuries. There is a risk of
injury.
Therefore, do not switch on the seat heating
repeatedly.
Seats
125
Z