Mercedes-Benz GLC Owner's Manual page 184

A departure time has
been activated. The aux-
iliary ventilation is cur-
rently activated. The
number in the display
shows the remaining
time (in minutes) for the
auxiliary ventilation. If
the vehicle is not started
after this time, the run-
ning time is increased by
five minutes.
A departure time has
been activated. The aux-
iliary heating is currently
activated. The number in
the display shows the
remaining time (in
minutes) for the auxiliary
heating. If the vehicle is
not started after this
time, the running time is
increased by five
minutes.
If the engine has not yet reached operating
temperature when it is started, the auxiliary
heating running time is increased. The auxili-
ary heating continues to run until the operat-
ing temperature is reached. If this is the case,
the y symbol appears in the remote con-
trol display and the running time is zero
minutes.
Setting the departure time
Make sure that the time set in the vehicle is
correct before setting the departure time (see
the separate operating instructions). Other-
wise, the auxiliary heating may switch on at
the wrong time and at an unsuitable location.
When setting the departure time, also
observe the important safety notes
( page 178).
Y
Operating the climate control system
Briefly press the u button.
X
Press the , or . button repeatedly
X
until the time to be changed appears in the
display.
Press the u and ^ buttons simulta-
X
neously.
The Î symbol in the remote control dis-
play flashes.
Press the , or . button to set the
X
desired departure time.
i
The longer you press the , or .
button, the faster the time changes.
Press the u and ^ buttons simulta-
X
neously.
The new departure time is stored.
Activating the set departure time
Briefly press the u button.
X
Press the , or . button repeatedly
X
until the desired departure time appears in
the display.
Press the u button.
X
The Í symbol, the departure time and,
depending on the selected departure time,
the letter A, B or C appear in the display.
Deactivating the set departure time
Briefly press the u button.
X
The status of the auxiliary heating is shown
in the display.
Press the . button.
X
The first departure time stored appears in
the display.
Press the ^ button.
X
OFF is shown in the remote control display.
Replacing the remote control battery
Important safety notes
G WARNING
Batteries contain toxic and corrosive substan-
ces. If batteries are swallowed, it can result in
severe health problems. There is a risk of fatal
injury.
181
Z