Mercedes-Benz GLC Owner's Manual page 292

Hide thumbs Also See for GLC:
Table of Contents

Advertisement

Instrument cluster
Electric range
:
Driving mode display (
;
Recuperative Brake System warning lamp (
=
Electric motor power display (
?
Displays and operation
Electric motor power display
The electric motor power display is on the
right-hand side of the instrument cluster.
Area : to ; (E-DRIVE):
R
This shows the electric output from the
electric motor, e.g. during electric opera-
tion or in boost mode.
When the motor is switched on, the display
is at limit :. With increasing pressure on
page 290)
Y
Y
page 289)
Y
PLUG‑IN HYBRID operation
page 377)
the accelerator pedal the display fills up
from : to ;.
Driving with the electric motor: when the
display reaches limit ;, the combustion
engine is switched on. If the display is
approaching limit ; and you remove your
foot from the accelerator pedal, the display
empties again. The combustion engine is
not switched on. At low speeds, you can
thereby control the electric operation
usage so that you only drive in electric
mode.
Driving with the combustion engine: the
electric motor supports the combustion
engine by providing additional torque
(boost mode) until the display reaches
limit ;.
You can also select the operating mode of
the hybrid drive system (
Area = to ? (CHARGE):
R
This shows the recuperated energy which is
stored in the high-voltage battery as elec-
trical energy.
289
page 290).
Y
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents