Advertisement
OPERATION
Preparing for use
1.
Insert the hose connector into the front of the vacuum cleaner and into the inlet
hole. (Fig. 1) To disassemble, press the release button and pull it out.
2.
Connect the hose to the metal extension. (Fig. 2)
3.
Connect to the brush and rotate to fasten. (Fig. 3)
4.
Extend the power cord: yellow indicates when to stop. Do not pull out passed the
red mark. Press the cord return button to retract when cleaning is complete. (Fig. 4)
5.
Plug into a power outlet and press the power button. (Fig. 5)
Fig. 1
Fig. 4
Fig. 2
Fig. 5
Fig. 3
Advertisement
