Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KA22CYTBVCA
Summary of Contents for Kogan KA22CYTBVCA
- Page 1 KOGAN MIGHTY 2200W CYCLONIC VACUUM CLEANER (WITH TURBO BRUSH) KA22CYTBVCA...
-
Page 3: Safety And Warnings
If during operation, the appliance makes any abnormal noise, smell, smoke or any other failure or breakage, including any issue with the power cord, cease use immediately and contact Kogan.com for Support. • This product is not intended for use by persons (including children) with reduced... - Page 4 OVERVIEW 2-in-1 brush Power button Extending metal tube Brush Release button Hose Handle Hose connector Cord return button Dust compartment Speed rotate button Wheel...
- Page 5 Attachments 2-in-1 brush: • The 2-in-1 brush is useful for cleaning corners and crevices. • The other side of the brush features bristles and is best used for cleaning sofas, curtains and dusting. Brush: • Stepping on the pedal of the brush lets bristles out for cleaning hard surfaces. •...
-
Page 6: Operation
OPERATION Preparing for use Insert the hose connector into the front of the vacuum cleaner and into the inlet hole. (Fig. 1) To disassemble, press the release button and pull it out. Connect the hose to the metal extension. (Fig. 2) Connect to the brush and rotate to fasten. - Page 7 Emptying dust compartment Hold the dust compartment and handle and push the release button. (Fig. 6) Remove the dust compartment. (Fig. 7) Hold over a rubbish bin and push the release button to open the bottom and empty. (Fig. 8) Close after emptying.
-
Page 8: Cleaning And Care
Some parts on this appliance are non-user serviceable, do not remove any parts that are not outlined in this section. If you are unsure of or require further assistance with any maintenance of this product, contact Kogan.com for support. Cleaning filter: Press to open the filter compartment. - Page 9 Rotate HEPA cover to separate from dust compartment cover. (Fig. 12) Remove HEPA cover. (Fig. 13) Remove filter out and tap to remove dust. Rinse under water. (Fig. 14) Wash the HEPA cover, the HEPA assembly, the outlet sponge and the dust chamber in water without detergent and allow to fully dry before use.
-
Page 10: Troubleshooting
This is the most common cause of vacuum cleaner faults and problems, including powering on and suction strength. If you are still experiencing issues, contact Kogan.com for support. - Page 11 NOTES...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...