Advertisement
3.
Rotate HEPA cover to separate from dust compartment cover. (Fig. 12)
4.
Remove HEPA cover. (Fig. 13)
5.
Remove filter out and tap to remove dust. Rinse under water. (Fig. 14)
6.
Wash the HEPA cover, the HEPA assembly, the outlet sponge and the dust
chamber in water without detergent and allow to fully dry before use. Don't use any
tools or implements to brush the HEPA filter paper, or it may be damaged.
7.
Replace the HEPA assembly on the chamber cover and make ensure the three
tabs are aligned with the grooves of the dust chamber.
8.
Rotate the HEPA assembly in the direction indicated on the chamber cover.
9.
Reassemble the chamber cover assembly and dust chamber as indicated.
10. Replace the dust chamber assembly in the machine. Ensure the chamber is
aligned correctly and press the handle: a click will be heard
Fig. 12
Fig. 13
Fig. 14
Advertisement
