Perle systems network router user manual (81 pages)
Summary of Contents for Perle IOLAN STG8
Page 1
802.3af Power over Ether (PoE) compliant External power supply A Quick Start Guide (this document) Power adapter, strain relief strap and rubber feet Wall mount brackets IOLAN STG8/SDG8 P Quick Start Guide – P/N 5500425-10 (Rev C)
Page 2
In console mode, the port provides access to the IOLAN management function using the industry standard CLI command set. See the IOLAN Command Line Interface Reference Guide. IOLAN STG8/SDG8 P Quick Start Guide – P/N 5500425-10 (Rev C)
Page 3
(if applicable to your application). 2. The console dip switch on the IOLAN should be set to the up position for serial mode. 3. Connect the power cord strain relief, if desired. See IOLAN STG8/SDG8 P Hardware Installation. Power over Ethernet The IOLAN SDG8 P can operate as a Powered Device (PD) under IEEE 802.3af...
Page 4
Connecting the Serial Device Connect the serial device to the IOLAN serial port. See the IOLAN STG8/SDG8 P Hardware Installation Guide for pinout details and how to terminate the serial port for 485/Full/Half and 422 mode if your application requires it. Software selectable EIA 232/422/485 interfaces are only supported on the SDG8 P model.