Advertisement
CONGRATULATIONS
Congratulations on your purchase of a Perlick high quality
residential Beer Dispenser. Perlick has proudly manufactured
beer dispensing systems for over 50 years for bars, restaurants,
stadiums, arenas and large venues around the world. That same
technology is used in each and every residential beer dispenser
we produce, assuring you'll pour fresh, cold beer as the brewery
intended it to be enjoyed.
All Perlick products are built with commercial grade stainless
steel, providing you with the beauty and durability for a lifetime
of use. This installation guide will show you how to properly
install the dispensing equipment on your Perlick Beer Dispenser.
We dedicate considerable time to ensure that our products
provide the highest level of customer satisfaction. If, however,
service is required, call Perlick at 800.558.5592. For your own
protection, never return merchandise for credit without our
approval.
We thank you again for selecting a high quality Perlick Beer
Dispenser. Cheers!
2 | perlick.com/residential
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
INTRODUCTION
The installation of the actual beer dispenser
Beer Dispenser for step-by-step installation
drawings may only show the Draft Arm, but
the instructions will also apply to the Adara
DANGER
!
disc vents at 122°F maximum.
DANGER
!
cylinder.
CAUTION
personnel to handle high pressure gas.
CAUTION
C
IMPORTANT!
cabinet should happen prior to installing
the dispensing equipment. Refer to the
Installation Manual that accompanied the
of the cabinet.
PLEASE NOTE
The following instructions are for both the
Draft Arm (standard tower) and the Adara
Signature Beer Tower. Some photos and
Signature Beer Tower unless noted.
Keep CO2 cylinder away from heat. Rupture
Do not drop or throw regulator or CO2
Allow only properly trained and experienced
Do not apply oil to the regulator!
US
Advertisement
