Digital Watchdog Snapit DWC-HD421D Manual page 25

DAY&NIGHT
7 DAY&NIGHT
TDN COLOR
BW to C
C to BW
CDS SET BW LOW
RETURN
BW to C
0~9 Adjusts the light level threshold at which the camera switches from night (BW) to day (Color).
High number means the higher light level. This number should be LOWER
than the value of Color to B/W.
C to BW
0~9 Adjusts the light level threshold at which camera switches from day (Color) to night (BW).
High number means the lower light level. This number should HIGHER
than the value of B/W to Color.
CDS SET
BW LOW Adjusts the filter change signal level when using IR LEDs.
BW HIGH BW HIGH is default.
RETURN
TDN MODE
AUTO
5
5
COLOR
BW
LED
The camera switches between day and night
automatically depending on the level of light.
The camera always stays in day mode (Color).
The camera always stays in night mode (B/W).
LED mode is supported when using external LED
light.
25