Specifications - Sony HKCU-IP43F Operation Manual

Specifications

HDCU4300
General
Power requirements 100 V to 240 V AC, 50/60 Hz
Current consumption 4.0 A (max.)
5 °C to 40 °C (41 °F to 104 °F)
Operating
temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage temperature
Mass Approx. 10.1 kg (22 lb 4.3 oz)
Dimensions (Unit: mm (inches))
3
424 (16 / )
4
3
465 (18 / )
8
482 (19)
Input/output connectors
CAMERA Optical fiber connector (1)
INTERCOM/TALLY/ D-sub 25-pin connector (1)
PGM
• INTERCOM (PROD/ENG), 4W: 0 dBu,
RTS: 0 dBu, CC: –14 dBu
• PGM, 2 systems, 0 dBu/–20 dBu
• TALLY (R, G, Y)
• FLAG
RCP/CNU 8-pin multi-connector (1)
TRUNK 12-pin (1)
LAN 8-pin (1)
NETWORK TRUNK 8-pin (1)
SDI I/O 3G/HD/SD SDI I/O (SLOT3)
BNC-type (2)
3G-SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE ST259, 0.8 Vp-p,
75 ohms, 270 Mbps
3G-SDI/HD-SDI/SD-SDI, character signal
selectable
Input connectors
AC IN 100 V to 240 V AC (1)
SDI RET IN BNC-type (2)
3G-SDI: SMPTE ST424/425, 2.970 Gbps/
2.967 Gbps
HD-SDI: SMPTE ST292, 1.485 Gbps/
1.4835 Gbps
SD-SDI: SMPTE ST259, 270 Mbps
VBS RET IN BNC-type (2), analog signal, 1.0 Vp-p,
75 ohms
REFERENCE BNC-type (2), loop-through output
HD: SMPTE ST274, tri-level sync,
0.6 Vp-p, 75 ohms
SD: Black burst (NTSC: 0.286 Vp-p,
75 ohms/PAL: 0.3 Vp-p, 75 ohms) or
NTSC 10F-BB
PROMPTER BNC-type (2), loop-through output during
1CH mode, terminate internally at 75 ohms
during 2CH mode, analog signal, 1.0 Vp-p,
75 ohms
Output connectors
AUDIO OUT CH1, XLR 3-pin, male (2), 0 dBu/–20 dBu/
CH2 +4 dBu
VBS MONITOR BNC-type (1), VBS, 1 Vp-p, 75 ohms
CHARACTER/SYNC BNC-type (1), VBS, 1 Vp-p, 75 ohms
HD SYNC: BTA-S001, tri-level sync,
0.6 Vp-p, 75 ohms
SD SYNC: composite sync, 0.3 Vp-p,
75 ohms
VBS/HD SYNC/SD SYNC selectable
64