Table of Contents
Advertisement
Overview
The HDCU4300 Camera Control Unit connects to a HDC4300
1)
Color Camera or HDC-P43 Multi Purpose Camera
with an
optical fiber cable, and carries out the processing of video
signals from the camera and provides an interface with
external equipment.
Connecting a camera facilitates 4K video shooting or HD high
frame rate video shooting. HD normal speed video and SD
normal speed video can even be simultaneously output when
4K video shooting and HD high frame rate video shooting.
Any one of the following option products (sold separately) can
be installed in the unit at a time.
HKCU-IP43F Networked Media Interface Board
Enables output of video signals and audio signals as IP
2)
signals.
HKCU-4001 ST 2110 Interface Kit
Enables operation of the unit in an IP transmission system that
2)
conforms to the SMPTE ST 2110 standard.
HKCU-4002 12G-SDI Extension Kit
Enables 12G-SDI output and 6G-SDI output.
1) To connect to the HDC-P43, an HKCU-SM100 CCU Extension
Adaptor and a single-mode fiber cable are required.
2) An SFP+ module is required to use IP output.
This unit may be combined with an MSU-1000 series Master
Setup Unit (optional) or an RCP-3000/1000 series Remote
Control Panel (optional) to form a camera control system. This
enables you to configure a system capable of controlling
multiple video cameras.
Note
Before operating the system, check that the software and
ROM versions of each of this unit, HDC4300, HDC-P43,
MSU-1000 series, and RCP-3000/1000 series are supported.
3
Hide quick links:
Advertisement
Table of Contents
