Before Installation - Mitsubishi Electric VL-50S2-E Installation Manual

4. Before installation

1. Remove the mounting plate.
then remove the mounting plate.
package pad.)
material such as cardboard.
2. Remove the panel.
the plane and pull toward you.
or other items do not get inside the unit.
Panel
Underlay
Mounting plate
Unit hanging screw
position
Mounting plate
position
Drain pan end
Unit hanging screw position
210.5
310 (min.)
3. Remove the terminal block cover (VL-
50ES -E only)
2
26.5
216
200
300
184
522
360 (min.)
Eng-4
Power and connection
cable pullout area
supply/exhaust
hole
Unit (mm)