Table of Contents
Advertisement
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
Prior to first use or after the relocation, the appliance should be installed and left
standing upright for at least 30 minutes, before it is connected to power supply.
•
After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
5.2
Operation
Tips for the User
•
Shelves may be positioned at various heights. Arrange them adequately to the
size of beverage containers, so that the inner space is used optimally.
EN
•
Beverages and snacks should be arranged on the shelves so that proper
distances between them allow for sufficient air circulation inside the appliance.
Insufficient distances hinder the cooling effect.
•
To limit loss of cold air minimize the opening time of door during operation. Do
not open the door too frequently.
•
If the appliance is switched off for a longer period of time, the appliance door
should remain open.
Preparation of the Appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section 6 "Cleaning".
2. Finally, dry the appliance and accessories thoroughly.
3. Introduce the shelves into the appliance at the selected height.
18 / 24
Installation and operation
700119
Advertisement
Table of Contents
