Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
FIRE HAZARD / FLAMMABLE MATERIALS HAZARD / EXPLOSION HAZARD! This symbol highlights potentially dangerous situations which could lead to injury or death. CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation.
Page 5
Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard! Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. ...
Page 6
Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. ...
Do not store gasoline or other flammable substances in the vicinity of the device. The vapours may cause fire or explosion. Do not store the explosive objects in the device, like cans with explosive work substances. Do not allow for the cooling circuit damages. 1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual.
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Overview of parts Side glass pane Lower display area Front glass pane Glass sliding doors LED lighting strips (2x) Glass pane frames Swivel castors (4x), 2 castors Shelves (2x) with brakes Air outlet vents Lower casing Air inlet vents Ventilation slots - 27 -...
5. Installation and operation 5.1 Installation Positioning Before the operation unpack the device and remove all package material and protective foil from the device and equipment. CAUTION! Never remove the rating plate and any warning signs from the device. ...
Connection DANGER! Electric shock hazard! The device can cause injuries due to improper installation! Before installation and connecting the local power grid specification should be compared with that of the device (see rating plate). Connect the device only in case of compliance! ...
Page 15
Switching on/off the lighting The device is equipped with 2 LED lighting strips (in its upper part). If necessary, the lighting may be switched on by briefly pressing the button To switch off the lighting press the button again Defrosting Automatic defrost The device’s automatic defrost cycle runs 4 times every 24 hours.
6. Cleaning WARNING! Before cleaning disconnect the device it from the power supply (pull the plug out the socket!). Do not use pressurized water jest for cleaning! Protect the device from the water penetration. CAUTION! Never use hot water for cleaning the device! Never use aggressive or coarse cleaning agents such as scouring powder, alcohol, solvents or other substances that could damage the device’s surfaces.
7. Possible Malfunctions In case of malfunction, disconnect the device from its power source. Before contacting the service or sales agent, verify - based on the table below - whether it is possible to eliminate disruption in operation. Malfunction Cause Solution ...
Page 18
The following conditions are not signs of malfunction: 1. The sound of flowing water. This sound is emitted during the normal use and it is the sound of coolant flowing in the device. 2. Condensation gathering on glass sides is normal in the increased ambient humidity.
For that purpose disconnect device from mains supply and remove mains connection cable from the device. The propellant used in the device is flammable. Its utilization should be realized according to the valid regulations. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax:...
Need help?
Do you have a question about the KV 270L and is the answer not in the manual?
Questions and answers