Installation And Operation; Installation - Bartscher 700398G Manual

5. Installation and operation

5.1 Installation

Positioning

Before the operation unpack the device and remove all package material and
protective foil from the device and equipment.
CAUTION!
Never remove the rating plate and any warning signs from the device.

Position the device in safe place of load capacity sufficient for weight of the device
with full content.

Never place the device on the flammable surfaces.

In order to avoid the compressor damages do not tilt the device during positioning
or transport by more than 45°.

Do not place the device in the vicinity of open fire, electric ovens, heating furnaces,
or other heat sources like direct sunlight. High temperature may damage the device
surface and may impact the cooling capacity and energy consumption.

When placing the device, make sure that the ambient temperature is in the
range from 10 °C to 32 °C.

Place device so that there is sufficient air circulation around the device. Keep a
distance of at least 10 cm from the walls and other objects.

Never cover or block ventilation ducts or air inlet and outlet.

Do not place the device in the area with high humidity. Relative humidity at the
location of the device shall not exceed 70 %. Excessive humidity may affect the
cooling power of the device.

Do not drill any holes and do not mount any other objects in the device or on the
device.

Do not place heavy objects on the device.

Place the device so that the plug is easily accessible in order to quickly disconnect
the device from the power source if necessary.
- 29 -