fantastic furniture Pod Lowboy 3 Drw Manual page 6

Step 3
You will need
Phillips Head
8 x Cam Bolts
Screwdriver
(H3)
Attach 8 x Cam Bolts (H3) to Left & Right Side Panel (P3 & P4) by tightening with the Phillips
Head Screwdriver.
Step 4
You will need
2 x Dowels
4 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H4) and 2 x Dowels (H1)
into Rails (P6 x 2 & P7) as shown. Rotate the
cam nuts so the arrows point towards the
incoming cam bolts. Attach Rails (P6 x 2 & P7)
to Right Side Panel (P4) by tightening all cam nuts
with the Phillips Head Screwdriver.
fantasticfurniture.com.au fantasticfurniture.com.au
(P3)
(P4)
(P7)
(P6)
(P6)
(P4)
Page 6