Energy Saving Panel; Operating The Oven - Rangemaster Professional+ FX 90 Induction User's Manual & Installation Instructions

Fig. 2.14
ArtNo.270-0026
Proplus MF oven controls (2)
Temperature selector
Fig. 2.15
ArtNo.270-0027
Proplus MF oven selector
control
Function selector
Fig. 2.16
ArtNo.270-0028
Proplus MF temp control
indicator light
The Browning and Base Heat functions are useful additions
to your oven, giving you flexibility to finish off items to
perfection. With use, you will soon realise how these
functions can combine to extend your cooking skills.

Energy Saving Panel

The oven has a divider feature (Fig. 2.11). With this in place
only one half of the oven is heated and only the right-hand
side elements are used. This saves energy and is ideal for
cooking most foods. When using the divider, condensation
may appear in the left-hand oven – this is normal.
For very large loads, or large dishes for special occasions then
the divider can be removed. This brings into use the elements
on the left-hand side as well as those on the right when a
function is selected.
All oven functions are available in full and divided forms and
shelves are provided for use in both forms.
WARNING! Take great care when removing the
n
divider not to scratch the inner glass door surface.
Scratches in the glass can cause stress and may
cause the door to fail.
Removing the Divider
Make sure the cooker is cool before attempting to
n
remove the divider.
Fully open the door and remove the oven shelves. When
removing the divider, tilt it slightly upwards and grip the
underside to prevent the metal base making contact with the
door glass (Fig. 2.12 and Fig. 2.13).
NOTE: We recommend that you place a tea towel or similar
on the door glass before removing the divider. This should
prevent the door inner from scratching.
DO NOT place or slide metallic objects, including cookware,
on the door glass as this may cause scratching and
subsequent failure to occur.

Operating the Oven

The multi-function oven has two controls: a function selector
and a temperature setting knob (Fig. 2.14).
Turn the function selector control to a cooking function. Fig.
2.15 shows the control set for convectional oven cooking.
Turn the oven temperature knob to the temperature you
need. The oven heating light will glow until the oven has
reached the temperature you selected. It will then cycle on
and off during cooking as the oven maintains the selected
temperature (Fig. 2.16).
14