Table of Contents
Advertisement
7
Network functions and connection types
You can use the following network functions by connecting the camera to a network using Wi-Fi or the
(Ethernet) terminal.
Network function
Transfer clips recorded with the camera to
FTP File Transfer
another device connected to the network
using the FTP protocol.
Stream the camera's live video and audio over
IP Streaming
IP to a compatible IP video decoder connected
to the network.
Control the camera remotely from the Web
Browser Remote
browser of a connected device.
Transfer clips/audio recorded with the camera
to a smartphone, or apply News Metadata
Canon App
created/edited with the smartphone
application to the camera.
1
Connection to a Wi-Fi network via an external access point (wireless router, etc.)
2
Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point.
Before using the network functions
• The instructions in this chapter assume you already have a correctly configured and working network and
correctly configured network device(s). If necessary, refer to the documentation provided with the network
devices you plan to use.
• Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet)
and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations.
IMPORTANT
• Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or
settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.
• Avoid using open networks or networks without sufficiently strong security settings. Using an unprotected
network can expose your data to monitoring by unauthorized third parties.
Wired network
Description
Network Functions
Wi-Fi
1
(Ethernet)
Infrastructure
Ü
Ü
Ü
–
A
Camera Access
2
Point
Ü
174
–
175
Ü
177
–
184
157
Advertisement
Table of Contents
