Canon XF605 Instruction Manual page 124

Custom Picture Settings
Menu items
[Black]
[Master Pedestal]
124
[Master Black Red],
[Master Black Green],
[Master Black Blue]
[Black Gamma]
[Level]
[Range], [Point]
[Point]
[Range]
Input
[Low Key Saturation]
[Activate]
[Level]
[Knee]
[Activate]
[Automatic]
[Slope]
[Point]
[Saturation]
[Slope]
Input
[Point]
Input
–50 to +50 (±0)
Increases or decreases the black level. Higher settings will make dark areas brighter but decrease
contrast. This setting is not available when the gamma curve component of the [Gamma/Color
Space] setting is set to one of the [Canon Log 2] or [Canon Log 3] options.
–50 to +50 (±0)
These settings correct the color cast in blacks. These settings are not available when the gamma
curve component of the [Gamma/Color Space] setting is set to one of the [Canon Log 2] or [Canon
Log 3] options.
–50 to +50 (±0)
–20 to +50 (±0)
These settings control the lower part of the gamma curve (dark areas of the image). These settings
[Level]
are only available when the gamma curve component of the [Gamma/Color Space] setting is set to
one of the [BT.709 Normal] or [BT.709 Standard] options.
[Level]: Raises or lowers the lower part of the gamma curve.
[Range]: Selects the adjustment range from the selected [Point].
[Point]: Determines the shape of the lower part of the gamma curve.
[On], [Off]
Set this setting to [On] to enable the adjustment of color saturation in dark areas with the [Level]
setting.
–50 to +50 (±0)
Specifies how saturated colors are in dark areas.
[On], [Off]
Set this setting to [On] to enable the adjustment of the knee point with the following settings. These
settings are only available when the gamma curve component of the [Gamma/Color Space] setting is
set to one of the [BT.709 Normal] or [BT.709 Standard] options.
[On], [Off]
–35 to +50 (±0)
50 to 109 (95)
–10 to +10 (±0)
These settings control the upper part of the gamma curve (highlights of the image). By compressing
the highlights, you can prevent parts of the image from being overexposed.
[Slope]: Determines the slope of the gamma curve above the knee point.
[Point]: Sets the knee point of the gamma curve.
[Saturation]: Adjusts the color saturation in the highlights.
Options / Additional information