Canon XF605 Instruction Manual page 152

Applying a LUT/the View Assistance Function to the LCD Screen
NOTES
• Setting [View Assist: HDMI] to [On (BT.709)] disables the > [¢ Monitoring Setup] > [Range: HDMI] setting.
• The colors modified by using this function are an approximation, and differ from the colors obtained when you
152
set [Gamma/Color Space] in the custom picture file (A 123) to [BT.709 Wide DR / BT.709].
• The colors in the dark areas / highlights of the image may not be displayed accurately.
Adjusting the Gain Difference When Converting HDR to SDR
When the video displayed on the screen or recorded as a proxy clip is set to HDR* and a LUT is applied, you can
adjust the difference in gain between the SDR output relative to the HDR image (±7.5 dB in 0.5 dB intervals).
* When the [Gamma/Color Space] setting in the custom picture file is set to [PQ / BT.2020] or [HLG / BT.2020], or when the
[Gamma/Color space] setting after applying a Look File is set to [HDR PQ (BT.2100)] or [HDR HLG (BT.2100)].
Select > [¢ Monitoring Setup] > [Gain for HDRSDR Conv.] > Desired option.