Adjusting The Equalizer - Sony STR-DA5200ES Operating Instructions Manual

Adjusting the equalizer

You can use following parameters to adjust the
tonal quality (bass/treble level) of the front
speakers and to store up to 5 different
equalizer settings and apply them. These
settings are applied to all sound fields and for
each speaker.
Bass
Level
(dB)
Frequency
(Hz)
Notes
• PCM 96 kHz signals cannot adjust the equalizer.
• This function does not work in the following cases.
– MULTI IN is selected.
– Input signals of which the sampling frequency is
more than 96 kHz are being received.
• If you adjust the equalizer during DTS 96/24 signal
reception, the signal will be played only at 48 kHz.
4
1
Connect a TV monitor to this
receiver.
Refer to "3: Connecting the monitor for
displaying menus" (page 19).
2
Turn on the receiver and the TV.
3
Press RECEIVER to enable
receiver operation.
4
Press ON SCREEN.
Treble
The menu list of this receiver appears on
the TV screen. Press MENU if the menu
list does not appear on the TV screen.
5
Press V/v repeatedly to select
"Settings," then press
The Settings menu list appears on the TV
screen.
6
Press V/v repeatedly to select
"Auto Calibration," then
7
Press V/v repeatedly to select
"User EQ," then press
8
Press V/v/B/b repeatedly to
select the preset number that
2
you want to register as the
number to store the equalizer
adjustment.
9
Press
3
10
Press V/v repeatedly to select
"Edit," then press
The equalizer adjustment screen appears
on the TV screen.
5-13
MENU
or b.
.
or b.
.
continued
.
75 GB