Table of Contents
Advertisement
PANoliUKyilalem: molelelalem al (-1(eM aagelere-lan
Adjusting the Digital Parametric Equalizer
The parametric equalizer is a tone control system with
adjustable center frequency and slope.
The unit provides flexible equalization using one-band
parametric equalizer with center frequency and slope, and 2-
band shelving equalizers with adjustable turnover points.
Before adjusting the digital parametric equalizer, play back
the program source. You can adjust the equalizer while
listening to the actual sound.
1 While playing a program source, click on SOUND in
the main menu.
The SOUND menu appears.
2 Click on a sound field.
Make sure that SOUND FIELD is on. If not, click on the
button to turn it on.
|
Be |
BEG
|
Be |
To return to the main menu, click on EXIT.
32
3 Click on EQ EDIT.
The EQUALIZER EDIT menu appears.
4 Ctick on TREBLE, MID or BASS to adjust the
frequency.
The graph for the selected frequency band appears.
EQUALIZER EDIT
(EH) mene
(EEE vo
DEE] exss
eon
5 Click on + or — to select the frequency to be
adjusted.
Click on t or | to raise or lower the level of the
selected frequency.
Note
You may hear some noise as you adjust the parameters.
6 Click on MID SLOPE if you want to adjust the center
frequency band (MID).
Each click selects WIDE, MIDDLE or NARROW.
7 Repeat steps 4 through 6 to adjust other frequency
bands.
To leave the menu
Click on EXIT.
To return to the previous menu
Click on RETURN.
To begin adjusting with a flat equalization curve
Click on FLAT to flatten the curve.
If the center frequency band overlaps the bass or treble
frequency band during adjustment
The level of both bands are added together.
The display of the equalization curve level is limited to
+100B.
Advertisement
Table of Contents
