Sony STR-DA5200ES Operating Instructions Manual page 121

3
Press the button for the
operation you want to perform
to learn the function as follows.
Press Operations to be
programmed
H, x, X,
Performs the operation
M, m,
of the button.
., >
The input Switches inputs.
button for more
than 1 second
MACRO 1 or Make a one second
MACRO 2 interval. When you want
to make a longer
interval, press MACRO
1 or MACRO 2
repeatedly.
The input button selected in step 2 flashes
twice, then lights up again.
4
Repeat steps 2 and 3. When you
want to assign another
command for the same
component, repeat step 3.
5
Press RM SET UP to finish the
programming process.
Tip
If the RM SET UP button flashes five times in
step 1, and the macro programming process
does not start, replace the batteries with new
ones.
To cancel programming
Press RM SET UP. Also, not pressing any
button for 60 seconds cancels the settings.
The previous command remains valid.
Starting macro play
1
Press RECEIVER.
The RECEIVER button lights up, and then
turns off.
2
Press MACRO 1 or MACRO 2 to start
the macro.
The macro starts and execute the
commands in the order you assigned them.
While the commands are being sent, the
RM SET UP button flashes and the
RECEIVER button lights up. When the
commands have been sent, the RM SET UP
and RECEIVER buttons turn off.
To erase a programmed macro
1
Press MACRO 1 or MACRO 2 for more
than 1 second while pressing RM SET
UP to clear the stored macro.
The RM SET UP button flashes,
repeatedly.
2
Press RM SET UP.
Settings stored as macro are cleared.
121 GB