Sony STR-DA5200ES Operating Instructions Manual page 33

Function for conversion of video
signals
This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR OUT jack as shown in the
illustration.
In the video input/output conversion table of the receiver
OUTPUT jack
HDMI OUT
INPUT jack
HDMI IN 1/2/3 A
COMPONENT
VIDEO IN B
S VIDEO IN C
VIDEO IN D
a : Video signals are converted and output through the video converter.
f : The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
* Video signals are output when "Video Convert" is set to "OFF" in the Video settings menu.
Input Signals
COMPONENT VIDEO
MONITOR OUT
f X
a f
a a
a a
• Video signals can be output as HDMI video,
component video and S video signals.
• S video signals can be output as HDMI
video, component video and video signals.
• Component video signals can be output as
HDMI video, S video and video signals.
For details on the video converting function,
see "Converting analog video input signals"
(page 88).
S VIDEO
MONITOR OUT
X
a
(Supports 480i and
576i input signals.)
a/f*
a
Output Signals
BCD
BCD
ABCD
VIDEO
MONITOR OUT
X
a
(Supports 480i and
576i input signals.)
a
a/f*
continued
33 GB