Ferroli OMNIA M 3.2 Installation And Owner's Manual page 433

Then you can do the following:
1) Configure the holiday away the following settings:
2) Activate the holiday mode.
Go to ''MENU'' > ''OPTIONS'' > ''HOLIDAY AWAY''.
Press ''OK'' .
Use ''ON/OFF'' to select ''OFF'' or ''ON'' and use ''
、 、
Setting
Holiday away
From
Until
Operation mode
disinfect
INFORMATION
i
If DHW mode in holiday away mode is ON,
The disinfect set by user is invalid.
If holiday away mode is ON, The timer and
weekly schedule are invalid except exit.
If the CURRENT STATE is OFF,the HOLIDAY
AWAY is OFF.
If the CURRENT STATE is ON,the HOLIDAY
AWAY is ON.
Disinfecting the unit on 23:00 of the last day if
disinfect is ON.
When in holiday away mode, the climate
related curves previously set is invalid, and the
curves will automatically take effect after the
holiday away mode is ends.
The preset temperature is invalid when in
holiday away mode, but the preset value still
display on the main page.
6.5.3 Holiday Home
The holiday home function is used to deviate from the
normal schedules without having to change them during
the holiday at home.
During your holiday, you can use the holiday mode to
deviate from your normal schedules without having to
change them.
Period
Before and after your Your normal schedules
holiday will be used.
The configured holiday
During your holiday
settings will be used.
If the holiday home mode is activated,
the home page.
Go to ''MENU'' > ''OPTIONS'' > ''HOLIDAY HOME''.
Press ''OK'' . The following page will appear:
''、
Value
ON
2 February 2018
16 February 2018
Heating
ON
Then...
will display on
OPTIONS
SILENT HOLIDAY HOLIDAY
MODE AWAY HOME
CURRENT STATE
FROM
UNTIL
TIMER
ON/OFF
ON/OFF
Use ''ON/OFF'' to select ''OFF'' or ''ON'' and use ''
、 、
If the CURRENT STATE is OFF, the HOLIDAY HOME is
OFF.
If the CURRENT STATE is ON, the HOLIDAY HOME is
ON.
、
Before and after your holiday, your normal schedule
will be used.
During your holiday, you save energy and prevent your
house from freezing.
INFORMATION
i
You have to exit Holiday away or Holiday
home, if you change the operation mode of the
unit.
6.5.4 Backup Heater
The BACKUP HEATER function is used to force the
backup heater. Go to ''MENU'' > ''OPTIONS'' >
''BACKUP HEATER''. Press ''OK'' . If IBH and AHS is set
invalid by DIP switch on the main control board of
hydraulic module , The following page will appear:
OPTIONS
SILENT HOLIDAY HOLIDAY
MODE AWAY HOME
IBH=Indoor unit backup heater.
AHS=Additional heating source.
If IBH and AHS is set valid by DIP switch on the main
control board of hydraulic module, The following page
will appear:
OPTIONS
SILENT HOLIDAY HOLIDAY
MODE AWAY HOME
BACKUP HEATER
ON/OFF
ON/OFF
BACKUP
HEATER
OFF
00-00-2000
00-00-2000
ENTER
''、
BACKUP
HEATER
BACKUP
HEATER
ON