Menu Structure; About The Menu Structure; To Go To The Menu Structure; To Navigate In The Menu Structure - Ferroli OMNIA M 3.2 Installation And Owner's Manual

4 MENU STRUCTURE

4.1 About the menu structure

You can use the menu structure to read out and
configure settings that are NOT meant for daily usage.
What you can see and do in the menu structure is
described where applicable. For an overview of the
menu structure, see " 7 Menu structure: Overview".

4.2 To go to the menu structure

From a home page, press ''MENU''.
Result: The menu structure appear：
MENU
OPERATION MODE
PRESET TEMPERATURE
DOMESTIC HOT WATER(DHW)
SCHEDULE
OPTIONS
CHILD LOCK
ENTER
OK
MENU
SERVICE INFORMATION
OPERATION PARAMRTER
FOR SERVICEMAN
WLAN SETTING
SN VIEW
ENTER
OK
4.3 To navigate in the menu
structure
、

5 BASIC USAGE

5.1 Screen Unlock

If the icon is on the screen, the controller is locked.
The following page is displayed:
Press any key, the icon will flash. Long press the
''UNLOCK'' key. The icon will disappear, the interface
can be controlled.
The interface will be locked if there is no handing for a
long time(about 120 seconds:it can be set by the
interface, see ''6.7 SERVICE INFORMATION''.)
If the inerface is unlocked, long press "unlock", the
interface will be locked.
Long press
UNLOCK UNLOCK
UNLOCK

5.2 Turning ON/OFF controls

Use the interface to turn on or off the unit for space
heating or cooling.
The ON/OFF of the unit can be controlled by the
interface if the ROOM THERMOSTAT is NON.(see
''ROOM THERMOSTAT SETTING'' in ''Installation and
owner's manual")
Press '' ''、 on home page, the black cursor will
appear:
1 ) When the cursor is on the temperature of space
operation mode side (Including heat mode
mode and auto mode
A
turn on/off space heating or cooling .
Long press
UNLOCK
, cool
), press ''ON/OFF'' key to